<?xml version="1.0" encoding="iso-8859-1" standalone="yes" ?>
<rss version="2.0">
<channel>
<title>Big Book of Amiga Hardware - Open questions</title>
<description>BigBookofAmigaHardware</description>
<link>http://www.bboah.com</link>
	<item>
		<title><![CDATA[I need to change the cable that link the ... (fred rousseau)]]></title>
		<description><![CDATA[I need to change the cable that link the neriki image master pro genlock to a comodore 2000.

on the comodore, there is 23 pin male and on the neriki image master there is 25 pin female conector]]></description>
		<link>http://www.bboah.com/index.php?action=open#openq_1</link>
		<pubDate>Mon, 24 Aug 2009 12:51:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hello, the Commodore: C2-ML (PAL Jnr) is not a ... (Mitchell Lopes)]]></title>
		<description><![CDATA[Hello, the Commodore: C2-ML (PAL Jnr) is not a sound card at all.  This is a Hard Disk/SCSI controller card.  It interfaced both ST506 hard drives and SCSI devices.

Also know as a A2090 and then a 2090a for auto booting when the card was made to fit the A2000. ]]></description>
		<link>http://www.bboah.com/index.php?action=open#openq_2</link>
		<pubDate>Tue, 17 Nov 2009 06:33:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I am interested in learning about the A520 Rf ... (Matt)]]></title>
		<description><![CDATA[I am interested in learning about the A520 Rf modulator. Specifically, if the clock signal (Pin 15) is required for correct operation. I understand that the A520 has a MC1377 device, and the Pin 15 clock ultimately interfaces with pin 17 of the MC1377 (oscillator input) but I'm unsure if whether a clock signal is actually required. ]]></description>
		<link>http://www.bboah.com/index.php?action=open#openq_3</link>
		<pubDate>Mon, 06 Sep 2010 11:33:00 GMT</pubDate>
	</item>
</channel>
</rss>