ID #4034

Commodore: A2058

Connection: Zorro II

a2058_frontsmall.jpg

a2058_backsmall.jpg

Rev 3, A2058
Rev 3, A2058

Hi Res Version of Front - 92K
Hi Res Version of Back - 96K
Hi Res Version, Rev 3, A2058 - 205K
Image of manual - 120K
Image of disk - 72K

Max Ram: 8MB
Ram Type: 1 Megabit DRAM Chips
Connection: Zorro II

The A2058 is a full length Zorro II RAM expansion which configures all of it's RAM within the Zorro II address space. The board can be populated with either 2, 4 or 8 meg of RAM using 1 Megabit by 1 DRAMs, 120ns or faster.

Jumpers
J1 J2 Memory Size RAM Location
Closed Closed 2MB Surface Mounted
Closed Open 4MB U16-U30 (every other one) and U55-U62
Open Open 8MB All locations
Open Closed * (See below)

* When the 2058's auto-config hardware is disabled, the board can be automatically configured independantly of the Amiga OS. This is in board diagnostic mode only.

Contributions to this page by:
Greg Scott (National Amiga), Jan Pedersen, Michael Czajka

Letzte Änderung des Artikels: 2009-01-26 22:55
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry