- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Time Base Correctors
DPS (Digital Processing Systems): Personal V-Scope (VM-2000)
Connection: ISA |
Personal V-Scope
Personal V-Scope with RC-2000
Hi Res Version, Personal V-Scope - 691K
Hi Res Version, Personal V-Scope with RC-2000 - 863K
Image of Personal V-Scope backplate - 107K
The V-Scope is not strictly a TBC but is really designed to be used with one. It plugs into an ISA slot, but active ISA slots are not required as it simply uses one for power. The DPS Personal V-Scope produces a digitally synthesized Waveform Monitor and VectorScope display which can be superimposed onto any video signal. This plug-in card is both AMIGA and IBM PC compatible and comes with control software for both. Any NTSC video signal may be input to the DPS Personal V-Scope which provides a buffered video output, a superimposed (software controlled) video output, and a full-time waveform/vector video output. When combined with the DPS Personal TBC II, III or IV, the V-Scope provides a fully integrated video processing, manipulating and monitoring environment.
Contributions to this page by:
Francisco Rabay Jr
Letzte Änderung des Artikels: 2009-01-29 14:55
Revision: 1.0
You cannot comment on this entry