ID #4124

MAST: MicroMegs

Connection: Trapdoor Slot (A500/+)

micromegs_front.jpg

micromegs_back.jpg

Max Ram: 512K
Ram Type:DRAM Chips
RTC: Yes
Connection: A500/+ Trapdoor Slot

The jumper on the card is for resetting the clock. If you want to reset the clock, remove the jumper then start the machine and replace it. You can then use preferences as normal to set the time. There is also a switch on the card but it is unclear what this does, as it does not appear to disable the clock or RAM.

Contributions to this page by:
Helena Hulten, Kristian Eklund

Letzte Änderung des Artikels: 2009-01-27 10:15
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry