ID #3228

Rombo: Vidi Amiga-12RT

Connection: Parallel Port

vidiamiga12rt_1.jpg

vidiamiga12rt_2.jpg

vidiamiga12rt_3.jpg

Hi Res Version, Image 1 - 110K
Hi Res Version, Image 2 - 122K
Hi Res Version, Image 3 - 746K

The Vidi Amiga 12RT is a 24bit video digitizer which plugs into the parallel port of the Amiga. It is capable of capturing video in realtime from either a PAL or NTSC source including SVHS. It is similar to the Vidi-Amiga 12 and Vidi-Amiga 12SV. It is possible to upgrade the Vidi Amiga 12-RT to the 2MB or RAM, this service was normally provided by Rombo. A power supply was not provided with the device, however it is recommended you use an additional power supply because the Amiga may not be able to supply enough power. A DC 9V 500m A 2.1mm power supply is required with the centre contact being positive.

Capture Resolution: 360x576 (PAL), 360x476 (NTSC)
Colour Resolution: 24bit 2:0.5:0.5 YUV


Letzte Änderung des Artikels: 2009-01-25 17:26
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry