- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Grafik (non RTG) & Videokarten
Electronic Design: Video Konverter
Connection: Video Slot |
It is a PAL video encoder made by a German company called Electronic Design (www.electronic-design.com). It is unknown if an NTSC version exists. The Video Converter is supposed to work in any Big Box Amiga. It provides both a Composite and S-video output as well as a buffered RGB output. The buffered output will not operate a genlock. The RGB output provides a standard 15Khz signal. The three trimpots in the centre allow fine tuning of the input RGB levels to eliminate any false colouration. A spare bracket is provided to allow it to be attached to the A2000 video port. Incidentally, Electronic Design made a range of other video hardware, including genlocks and timebase correctors. The timebase corrector was a stand-alone device that did not need an Amiga, however it had a 23 pin socket to allow a 1084 monitor to be attached.
Contributions to this page by:
Christer Beskow
Letzte Änderung des Artikels: 2009-01-25 19:43
Revision: 1.0
Kommentieren nicht möglich