- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Open questions 
Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.
| Date / User | Question | |
|---|---|---|
| 2009-08-24 14:51 fred rousseau | Genlocks: I need to change the cable that link the neriki image master pro genlock to a comodore 2000. on the comodore, there is 23 pin male and on the neriki image master there is 25 pin female conector | Answer |
| 2009-11-17 07:33 Mitchell Lopes | Sound Cards: Hello, the Commodore: C2-ML (PAL Jnr) is not a sound card at all. This is a Hard Disk/SCSI controller card. It interfaced both ST506 hard drives and SCSI devices. Also know as a A2090 and then a 2090a for auto booting when the card was made to fit the A2000. | Answer |
| 2010-09-06 13:33 Matt | Misc. Hardware: I am interested in learning about the A520 Rf modulator. Specifically, if the clock signal (Pin 15) is required for correct operation. I understand that the A520 has a MC1377 device, and the Pin 15 clock ultimately interfaces with pin 17 of the MC1377 (oscillator input) but I'm unsure if whether a clock signal is actually required. | Answer |