- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Grafikkarten (RTG)
MacroSystem (US & Germany): Retina Z2
Connection: Zorro II |
Retina ZII with manual and disks
Rev 1.1, 4MB version
Rev 1.1, 1MB version
Hi Res Version, Rev 1.1, 1MB version - 1004K
Hi Res Version, Rev 1.1, 4MB version - 521K
Chipset(s) | Symbios Logic (NCR) 77C22E |
Graphics Memory | 1MB or |
2MB or | |
4MB | |
8bit Support: | Yes |
16bit Support: | Yes |
24bit Support: | Yes (except for 1MB version) |
Display Drivers | |
CyberGraphX V2: | No |
CyberGraphX V3: | No |
CyberGraphX V4: | No (Despite adverts saying it does, it does NOT) |
Picasso 96: | No |
EGS: | Yes |
Other: | Yes (RetinaEmu RTG) |
A Zorro II only graphics card. It was available in 1MB, 2MB or 4MB versions. The RAM on the card is in the form of ZIP chips and can be upgraded if necessary to a maximum of 4MB. The 1MB and 2MB versions used 414256 ZIP Chips, but the 4MB version uses 414400 ZIP chips used in alternating sockets (ie 1,3,5... etc). 80ns RAM generally works, however it used recommended that you use 70ns RAM or faster. The memory on board is automatically detected. However if the Retina does detect an incorrect memory size, or reports an absence of memory, then one jumper allows you to set the wait-state value which may be necessary with faster machines. It has a pixel clock of 90Mhz (8bit). Apprently the Retina Z2 has some sort of AGA compatibility mode, that may allow some programs intended for use with AGA to work, although it's quite slow, particularly with games. The AGA emulation mode also supports HAM-6 and HAM-8 but must be operated in 24bit mode. The 1MB version of this can also supports 24bit in 800x600.
Board Layout
|___
____________________________________________________________|
| |
| |
| |
| || || || || || || || || |# Video
| || || || || || || || || |# Port
| || || || || || || || || |# (HDD15)
| |
| 8 7 6 5 4 3 2 1 |
| |
| JP |
| .. |
|____________________________________________________________|
||||||||||||||||||||||||||| |
Resolution | Depth | Frequency |
---|---|---|
300x200 | 24 | 85Hz |
600x400 | 24 | 80Hz |
800x600 | 24 | 64Hz |
1024 x 768 | 16 | 50Hz |
1280 x 1024 (laced) | 16 | 95Hz |
1280 x 1024 | 8 | 50Hz |
1600x1200 (laced) | 8 | 80Hz |
Jumper | Open | Closed |
---|---|---|
JP | Enable wait states | Disable wait states |
Contributions to this page by:
Christian Krenner, Greg Scott (National Amiga), Mario Misic, Michael Dittmar, RiWa & Friends, Sebastian Kinner
Letzte Änderung des Artikels: 2009-01-25 20:37
Revision: 1.0
Kommentieren nicht möglich