- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Grafikkarten (RTG)
Village Tronic: Picasso II
Connection: Zorro II |
Picasso II, 2MB Version
Picasso II, 1MB Version
Picasso II, Prototype
Hi Res Version, Picasso II, 2MB Version - 721K
Hi Res Version, Picasso II, Prototype - 48K
Chipset(s) | Cirrus Logic GD5426 |
Graphics Memory | 1MB (60ns) or |
2MB (60ns) | |
8bit Support: | Yes |
16bit Support: | Yes |
24bit Support: | Yes |
Display Drivers | |
CyberGraphX V2: | Yes |
CyberGraphX V3: | Yes |
CyberGraphX V4: | Yes |
Picasso 96: | Yes |
EGS: | Yes |
Other: | Yes |
The Picasso II is a Zorro II only graphics card. It has a pixel clock of 85Mhz (8bit), 45Mhz (16bit), 28Mhz (24bit). The Picasso II requires Workbench 2.0 or above, and includes two connectors, one which is designed to pass through native Amiga video, and one for the physical attachment of the monitor. Depending on the cable you have the Amiga's native video can either come directly from the the RGB port, or from another flicker fixer or scandoubler. For A2000 owners, the Picasso II also supports segmented memory. This means that the graphics card can still be used, even if you currently have other peripherals (such as memory) which are using up the full Zorro II address space. However in segmented memory mode, performance is degraded and applications may not behave very well. Please also note, that depending on the RTG driver you use (P96, CGX, EGS), segmented mode may not be supported. To change to segmented memory mode, there is a jumper next to a row of four chips, on the right hand side of the card. This should be ON to enable segmented memory.
Resolution | Depth | Frequency |
---|---|---|
1280 x 1024L | 8 | 48.37Khz x 87Hz |
1152 x 900 | 8 | 63.62Khz x 68Hz |
1120 x 832 | 8 | 63.1Khz x 73Hz |
1024 x 768 | 8 | 63.19Khz x 78Hz |
800 x 600 | 8 | 54.61Khz x 82Hz |
640 x 480 | 8 | 38.32Khz x 73Hz |
800 x 600 | 16 | 37.89Khz x 60Hz |
640 x 480 | 16 | 37.59Khz x 71Hz |
640 x 480 | 24 | 34.02Khz x 64Hz |
L = Laced (ie Interlaced mode)
Contributions to this page by:
Antoine Dubourg, Iggy Drougge, Mario Misic, RiWa & Friends
Letzte Änderung des Artikels: 2009-01-25 20:40
Revision: 1.0
Kommentieren nicht möglich