- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Grafikkarten (RTG)
XPert: Merlin
Connection: Zorro Auto Sensing |
Rev 3.1 Merlin
Hi Res Version, Rev 3.1 Merlin - 1425K
Chipset(s) | Tseng Labs ET4000W32p |
Graphics Memory | 2MB or |
4MB | |
8bit Support: | Yes |
16bit Support: | Yes |
24bit Support: | Yes |
Display Drivers | |
CyberGraphX V2: | No |
CyberGraphX V3: | No |
CyberGraphX V4: | No |
Picasso 96: | Yes |
EGS: | Yes |
Other: | Yes |
The Merlin is a Zorro II and III auto-sensing graphics card. It has a pixel clock of 130Mhz (8bit), 65Mhz (16bit), 43Mhz (24bit). The card also has an RGB IN socket (VGA type) which feeds an auto-switcher on the board. It has no scandoubling abilities but if the native screens are fed into a scandoubler, then into this connector, the Amiga's native graphics modes can be displayed through the card. There is a feature connector header on the Merlin to accomodate a video digitiser module made by Xpert called the Merlin X-Calibur. No matter how much ram is on the board only 2MB can be used in Zorro II mode. Please note that to get this board to work in the Zorro IV busboard for the A1200 you may need to change a jumper - "For Apollo 1240 accelerator card config 0 jumper should be closed, other ZIV jumpers should be opened."
The card also has an SVHS OUT and FBAS OUT. The board contains what appears to be 2 x 72pin SIMM slots for adding additional graphics memory. The 72pin SIMMs are not standard PS/2 SIMMs as used by most accelerators, but use a different control logic. It supports 1 x 2MB 32bit SIMMS, 1 x 4MB 32bit SIMMs or 2 x 2MB 16bit SIMMs for a maximum of 4MB of RAM. If you experience many bugs using the Merlin such as garbage when dragging the screen or using the menus, you may require a hardware update. Likewise, your Merlin may not be compatible with the 060 in which case you'll need the hardware update also, which is apparently still available from the original developer, see below. An FAQ written by the designer of the card, can be found
Letzte Änderung des Artikels: 2009-01-25 20:43
Revision: 1.0
Kommentieren nicht möglich