- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
IDE Controller
ID #3549
M-Tec: Mtec AT 500
Connection: Side Expansion Slot |
Inside unit
IDE Controller which connects to the side expansion slot of the A500. The unit can be expanded with 8MB RAM in the form of 30pin SIMMS and also contains a ROM socket for installing newer versions of Kickstart. The switch on the front left of the unit is for turning the hard drive on and off whilst the switch on the front right is for switchting between the ROM on the AT500 and the ROM inside the Amiga. The HD controller, despite being IDE may only be able to accept one device.
Contributions to this page by:
Bill Sorrell, Iggy Drougge, Jürgen Weiß
Letzte Änderung des Artikels: 2009-01-26 09:13
Revision: 1.0
Durchschnittliche Bewertung: 0 (0 Abstimmungen)
Kommentieren nicht möglich