- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
IDE Controller
Telmex Engineering: Telmex CDROM Controller
Connection: PCMCIA |
Front of CDROM
Back of CDROM
The Telmex CDROM controller connects to the PCMCIA port of the A600 and A1200. It consists of a PCMCIA card, and external CDROM case housing the CDROM and two PCBs and a is powered by a 13.5v power supply. The case also has sterieo audio out and audio in connectors. The audio in is mixed with the audio from the CDROM. The PCBs step down the voltage to provide 5v and 12V to power the CDROM and audio mixing circuit. The cable between the CDROM unit and the PCMCIA is quite heavy duty and there's a driver for the unit in the IDE-Fix software suite. To get CDROMs working, it may be necessary to remove the "master" jumper.
On the PCB there is a little SMPS-Circuit which is labeled:
Motorola
34063AP1
KBI
9543
Contributions to this page by:
Jürgen Weiß, Sebastian (Exin)
Letzte Änderung des Artikels: 2009-01-26 09:18
Revision: 1.0
Kommentieren nicht möglich