- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
versch. ZORRO Karten
Amiga Hardware Tuning: AHT EPROM/RAM Card
Connection: Zorro II |
Picture of the card populated with 2x32K SRAM for testing purposes
Hi Res Version of Front - 327K
Hi Res Version of Back - 388K
This device is actually a self-made hardware project with came with a book called "Amiga Hardware Tuning". The PCB was supplied with the book but the reader was intended to source the components and build the card. The card can be used as a RAM disk as an EPROM "Hard Drive" or as a non-volatile RAM disk (ie remembers contents after power-off) as it can be powered by a NiCad battery. It supports a maximum of 1MB of RAM. This device is auto-configurable and even supports auto-booting.
Contributions to this page by:
Magnus Groenlund, Sebastian Breitkreuz
Letzte Änderung des Artikels: 2009-01-26 15:28
Revision: 1.0
Kommentieren nicht möglich