- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Netzwerk Karten
Amitrix: Amiga-Link
Connection: Floppy Drive Port (Extern) |
Amiga-Link
Hi Res Version, Amiga-Link - 65K
Image of Amiga-Link box - 499K
Type | Custom (Uses external floppy drive ports) |
SANA-II Driver: | Yes |
MNI Driver: | No |
Other Driver: | Yes (NOS Custom Driver) |
The Amiga-Link is a networking solution which uses the external floppy drive port of the Amiga. It uses the same coax cabling as 10Base2 Ethernet (RG-58U/50Ohm) but is NOT compatible. The Amiga-Link is capable of transferring at about 50k/sec and supports up to 20 machines on a maximum cable length of 100 metres. The Amiga-Link requires at least Kickstart 1.2, but Kickstart 2.0+ is highly recommended. The external floppy drive can still be used, providing that it has a pass-through port. One exception to this is the A1010 because its pass-through port is not powered. The Amiga-Link is also not compatible with SX-1
The AmigaLink may be the same device as the Disknet, but this has not been confirmed.
Contributions to this page by:
Georg Pesch, Jaeson Koszarsky
Letzte Änderung des Artikels: 2009-01-26 21:17
Revision: 1.0
Kommentieren nicht möglich