- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
RAM Erweiterungen
Expansion Systems: DataFlyer RAM Expansion
Connection: Other, Zorro II |
Hi Res Version of Front - 161K
Hi Res Version of Back - 173K
Max Ram: | 8MB |
Ram Type: | 8 x 30pin SIMM Slots |
Connection: | Zorro II or piggy-backed onto Dataflyer |
This RAM expansion is designed for use as a stand-alone Zorro II card, or it can be piggybacked to the Dataflyer 500 or Dataflyer (PLUS). Please note that the Dataflyer 500 and the Dataflyer (PLUS) are exactly the same product, the Dataflyer 500 is actually the Dataflyer (PLUS) mounted in a case suitable for connection to the side expansion slot of the A500 (or A1000).
512k | 1 Meg | 2 Meg | 2 meg | 4 meg | 8 Meg | |
---|---|---|---|---|---|---|
Jumpers On | 3 | 1,3,7 | 2,3,6,7 | 2,3 | 1,2,3,5 | 4,5 |
Notes about piggybacking
For Dataflyer (PLUS):
The version of the Dataflyer must be at least "Dataflyer PLUS V1.0" to
support piggybacking. Earlier versions such as "Dataflyer V1.2" (Note
the missing PLUS designation) cannot be used in this way. The advantage
of piggybacking the RAM card to the Dataflyer instead of using it as as
a Zorro II card is that you will save a Zorro II slot, however you may
have to use a Zorro slot at the end, for clearance reasons.
For Dataflyer 500:
The only way to attach this RAM card to the Dataflyer when used with an
A500 is by piggybacking. All versions of the dataflyer support
piggybacking when used with the A500.
Contributions to this page by:
Anthony Fox, Christopher Smith, Mario Misic, Ron Mascaro, Steve Geary
Letzte Änderung des Artikels: 2009-01-27 09:45
Revision: 1.0
Kommentieren nicht möglich