- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
RAM Erweiterungen
ID #4080
Georg Braun: Phoenix RAM Card
Connection: Side Expansion Slot, Front Memory Slot |
Front
Back
Card installed
Max Ram: | 4MB |
Ram Type: | Soldered 55ns SRAM Chips |
RTC: | No |
Connection: | Side Expansion Slot / Front Memory Slot |
A RAM card designed for use with the Amiga clone called the A1000 Phoenix. It is unknown if the card is compatible with the standard A1000 from Commodore, but it's assumed not to be the case. Up to two of these cards can be installed for a maximum of 8MB. One the in the front slot, and one in the side slot. An 8MB version is also being worked on. The images above show the prototype version of the card.
Contributions to this page by:
Jürgen Weiß
Letzte Änderung des Artikels: 2009-01-27 09:49
Revision: 1.0
Durchschnittliche Bewertung: 0 (0 Abstimmungen)
Kommentieren nicht möglich