- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
RAM Erweiterungen
ID #4124
MAST: MicroMegs
Connection: Trapdoor Slot (A500/+) |
Max Ram: | 512K |
Ram Type: | DRAM Chips |
RTC: | Yes |
Connection: | A500/+ Trapdoor Slot |
The jumper on the card is for resetting the clock. If you want to reset the clock, remove the jumper then start the machine and replace it. You can then use preferences as normal to set the time. There is also a switch on the card but it is unclear what this does, as it does not appear to disable the clock or RAM.
Contributions to this page by:
Helena Hulten, Kristian Eklund
Letzte Änderung des Artikels: 2009-01-27 10:15
Revision: 1.0
Durchschnittliche Bewertung: 0 (0 Abstimmungen)
Kommentieren nicht möglich