- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
RAM Erweiterungen
Micronik: RCA120
Connection: Trapdoor Slot (A1200) |
Hi Res Version of Image 1 - 188K
Hi Res Version of Image 2 - 240K
Max Ram: | 8MB |
Ram Type: | 1 x 72pin SIMM slot |
FPU: | Optional 68881 or 68882 at up to 50Mhz |
RTC: | Yes |
Connection: | A1200 Trapdoor slot |
A RAM card for the A1200 which plugs into the trapdoor slot of the A1200. This card is not PCMCIA friendly if it has more than 4MB of RAM installed. If you install 8MB on the card and require the use of the PCMCIA slot, you must move JP2 to the ON position to disable the upper 4MB of RAM. Rev B versions of the card support a PGA FPU whilst Rev C's require a PLCC FPU.
SIMM Size | JP1 (1-2) | JP1 (3-4) |
---|---|---|
1MB | ON | OFF |
2MB | OFF | ON |
4MB | ON | ON |
8MB | OFF | OFF |
SIMM STYLE | JP1 (5-6) | CLOCK SPEED JP3 |
---|---|---|
Single Sided | ON | Use A1200 Clock (1-2) |
Double Sided | OFF | Use RCA Oscillator (2-3) |
Note: When running clocked from the board (14.3MHz) the JP3 jumper bock should be on the left (1-2) postion. When using a faster FPU and Oscillator, JP3 jumper block should be moved to the right (2-3) position.
Contributions to this page by:
Amiga Deals, Kokkie, Mike
Letzte Änderung des Artikels: 2009-01-27 10:23
Revision: 1.0
Kommentieren nicht möglich