- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Tower Kits
Amiga Techology Australia: Amiga 4000TX Tower-minator
Picture showing the front of the case
Picture showing the front top part of the case
Picture showing the inside of the case from the side
Picture showing the chrome effect of the rear of the case
Picture showing the luminescent front panel
Dimensions: | Unknown |
3.5" Bays: | 5 (1 reserved for floppy drive) |
5.25" Bays: | 5 (4 with faceplates) |
PSU: | Unknown |
This has to be one of the coolest looking towers ever made for the Amiga. Only about 200 of these towers were ever made and only a few of those got the luminescent panels. The A4000 motherboard is actually mounted on a tray for easy access and uses the A4000's standard busboard which is mounted at right angles to the motherboard. There were plans to make an adaptor to allow the busboard to run parallel with the motherboard, but this never happened.
Contributions to this page by:
Michael Czajka
Letzte Änderung des Artikels: 2009-01-29 15:02
Revision: 1.0
Kommentieren nicht möglich