- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Tower Kits
Elbox: Mirage 3000
Hi Res Version of Front - 81K
Hi Res Version of Back - 88K
Hi Res Version of Interior - 263K
Dimensions: | 430 x 190 x 620 mm |
3.5" Bays: | 4 (0 with faceplates, see below) |
5.25" Bays: | 5 (4 with faceplates, see below) |
PSU: | ATX 300 watt |
The Mirage 3000 allows you to place your desktop A3000 in a highly expandable tower, complete with PCI slots and Zorro III slots. The Mirage A3000 makes use of the Mediator 3000 PCI. It also has an active reset button, green power LED and red hard drive LED. Although the tower appears to have two externallly accessible 3.5" drive bays, these are rendered useless because of the size of the A3000 motherboard and the way it is mounted. The same applies to the bottom 5.25" drive bay. Also one of the remaining 5.25" drive bays is reserved for mounting the floppy drive.
Contributions to this page by:
Elbox, Orjan Lindgren, Paul R Rezendes
Letzte Änderung des Artikels: 2009-01-29 15:17
Revision: 1.0
Kommentieren nicht möglich