- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Tower Kits
ID #4500
Micronik: Micronik 3000 Tower
Dimensions: | 625 x 400 x 190 mm |
3.5" Bays: | 4 (2 with faceplates) |
5.25" Bays: | 4 (4 with faceplates) |
PSU: | Original A3000 PSU or optional 230/250 watt PSU) |
A towerkit designed to house an A3000 motherboard. It includes a special faceplate so that an original A3000 floppy disk drive can be mounted in one of the 5.25" drive bays. Specially cut holes in the back of the case mean that all the A3000 ports fit perfectly without requiring any extention cables. An additional fan can be mounted inside the tower case. It contains a door on the front to cover the drive bays, includes a Mhz rating LED and a keylock. The tower is also designed to be used with the Micronik A3000 busboard.
Letzte Änderung des Artikels: 2009-01-29 15:29
Revision: 1.0
Durchschnittliche Bewertung: 1 (1 Abstimmung)
Kommentieren nicht möglich