- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
Zorro Erweiterungen & Busboards
Atéo Concepts: AteoBus
Connection: Trapdoor Slot (A1200) |
Zorro II: | None | |
Zorro III: | None | |
ISA: | None | |
PCI: | None | |
Video Slots: | None | |
Other: | 4 x Ateobus Slots |
The Ateobus was designed by Ateo for use with their tower systems. The Ateobus is really just a customised ISA bus with some slight modifications and has a maximum speed of about 9.3MB/sec. There is no support of ISA DMA however it does have a "fast" mode for cards like the Pixel 64. This bus could in theory use ISA cards which do not require DMA, however the drivers were not open and only ever written by Ateo themselves. The bus comes in two sections. The first section plugs into the trapdoor slot of the A1200 and includes a pass-thru for accelerators whilst the other section is the actual bus.
Contributions to this page by:
Jaeson Koszarsky, Olivier Croquette
Letzte Änderung des Artikels: 2009-01-29 15:45
Revision: 1.0
Kommentieren nicht möglich