- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
A1200 Turbokarten
Microbotics: M1230 XA
Paravision: M1230 XA |
Connection: Trapdoor Slot (A1200) |
33Mhz version with 68882 FPU fitted
50Mhz version, no FPU fitted
Hi Res Version, 33Mhz, Front - 264K
Hi Res Version, 50Mhz, Front - 288K
Hi Res Version of Back - 69K
Processor: | 030@25Mhz, 030@33Mhz, EC030@40Mhz or 030@50Mhz |
FPU: | Optional 68881 or 68882 (PGA) from 20Mhz up to 60Mhz |
MMU: | None in EC030s, Internal in full 030s. |
Max Ram: | 128MB |
Ram Type: | 1 x 72pin SIMM slot |
An accelerator which plugs into the trapdoor slot of the A1200. The board allows the configuring of the RAM speed and cycle ranges manually and supports cycle ranges 1-5 and RAM speeds of 50 - 100ns. You may need to configure this with the provided software utilities. Similarly you may not see all the RAM until you use the provided utilities to add it. Includes a battery backed up clock.
In an A1200 equipped with 3.1ROM and Workbench 3.1, you don't need to run any configuration utility to recognize the installed RAM.
This accelerator is PCMCIA friendly.
Contributions to this page by:
Amiga Deals, Jack Thewlis, Orjan Lindgren, Rogerio Kauer, ViTaL
Letzte Änderung des Artikels: 2009-01-25 09:18
Revision: 1.0
Kommentieren nicht möglich