- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
RAM Expansions
Computer Peripherie: MegiChip
Connection: Other |
Closeup of Rev 8
Rev 8
Hi Res Version, Image 1 - 309K
Hi Res Version, Image 2 - 109K
Hi Res Version, Closeup of Rev 8 - 79K
Hi Res Version, Rev 8 - 66K
Max Ram: | 2MB CHIP Ram |
Ram Type: | Unknown |
FPU: | None |
RTC: | None |
Connection: | Probably Agnus/Gary socket |
A RAM expansion designed to provide the Amiga with 2MB of CHIP RAM, apparently a 1MB version also exists. It contains an upgraded Agnus chip and is probably design to be used with the A500 and A200. Apparently this device also needs to connect to the gary chip. The gary chip should be removed, placed in the socket holder which was provided and then this should be reinserted back into the motherboard. This unit is very similar to the DCE MiniMegi.
Contributions to this page by:
Andreas Stürmer, RiWa & Friends
Letzte Änderung des Artikels: 2009-01-26 22:59
Revision: 1.0
You cannot comment on this entry